Updated build info.

Now building on linux.

docs/build.md

@@ -0,0 +1,58 @@
+# Building Perspex 
+
+## Windows
+
+Perspex requires Visual Studio 2015 to build on Windows.
+
+### Install GTK Sharp
+
+To compile the full project under windows, you must have gtk-sharp installed. However, if you're 
+not interested in building the cross-platform bits you can simply unload the Perspex.Cairo and 
+Perspex.Gtk project in Visual Studio.
+
+### Clone the Perspex repository
+
+    git clone https://github.com/grokys/Perspex.git
+
+We currently need to build our own private version of ReactiveUI as it doesn't work on mono. This
+is linked as a submodule in the git repository, so run:
+
+   git submodule update --init
+
+## Linux
+---------------------------
+
+This guide Written for Ubuntu 15.04 - I'm not sure how well it applies to other distributions, but
+please submit a PR if you have anything to add.
+
+### Install Latest Mono
+
+That the time of writing, mono 4.2 aplha was needed to build. Add mono package sources by following
+instructions below for the stable channel, and then add the alpha channel to 
+`/etc/apt/sources.list.d/mono-xamarin-alpha.list` as well.
+
+http://www.mono-project.com/docs/getting-started/install/linux/#debian-ubuntu-and-derivatives
+
+Then install the needed packages:
+
+    sudo apt-get install git mono-devel referenceassemblies-pcl monodevelop
+
+### Clone the Perspex repository
+
+    git clone https://github.com/grokys/Perspex.git
+
+We currently need to build our own private version of ReactiveUI as it doesn't work on mono. This
+is linked as a submodule in the git repository, so run:
+
+   git submodule update --init
+   
+### Load the Project in MonoDevelop
+
+Start MonoDevelop and open the `Perspex.sln` solution. Wait for MonoDevelop to install the
+project's NuGet packages.
+
+Set the TestApplication project as the startup project and click Run.
+
+There will be some compile errors in the tests, but ignore them for now. 
+
+You can track the Linux version's progress in the [Linux issue](https://github.com/grokys/Perspex/issues/78).

docs/mono-build.md

@@ -1,28 +0,0 @@
-Compiling Perspex on Ubuntu
----------------------------
-
-Written for Ubuntu 15.04.
-
-Install Latest Mono
--------------------
-
-Add mono package sources by following instructions at:
-
-http://www.mono-project.com/docs/getting-started/install/linux/#debian-ubuntu-and-derivatives
-
-Then install the needed packages:
-
-    sudo apt-get install git mono-devel referenceassemblies-pcl monodevelop
-
-Clone the Perspex repository
-----------------------------
-
-    git clone https://github.com/grokys/Perspex.git
-   
-Load the Project in MonoDevelop
--------------------------------
-
-Start MonoDevelop and open the `Perspex.sln` solution. Wait for MonoDevelop to install the
-project's NuGet packages.
-
-Set the TestApplication-Mono project as the startup project and click Run.

readme.md

@@ -9,10 +9,9 @@ A multi-platform .NET UI framework.
 
 ## Background
 
-Perspex is a multi-platform windowing toolkit - somewhat like WPF - that is
+Perspex is a multi-platform windowing toolkit - somewhat like WPF - that is intended to be multi-
-intended to be multi-platform (more about that below). It supports XAML,
+platform. It supports XAML, lookless controls and a flexible styling system, and runs on Windows
-lookless controls and a flexible styling system, and runs on Windows using
+using Direct2D and other operating systems using Gtk & Cairo.
-Direct2D and other operating systems using Gtk & Cairo.
 
 ## Current Status
 
@@ -29,34 +28,18 @@ framework.
 
 As mentioned above, Perspex is still in alpha and as such there's not much documentation yet. You can 
 take a look at the [alpha release announcement](http://grokys.github.io/perspex/perspex-alpha/) for an 
-overview of how to get started but probably the best thing to do for now is to already know a little bit about WPF/Silverlight/UWP/XAML and ask questions in our [Gitter room](https://gitter.im/grokys/Perspex).
+overview of how to get started but probably the best thing to do for now is to already know a little bit
+about WPF/Silverlight/UWP/XAML and ask questions in our [Gitter room](https://gitter.im/grokys/Perspex).
 
 There's also a high-level [architecture document](docs/architecture.md) that is currently a little bit
 out of date, and I've also started writing blog posts on Perspex at http://grokys.github.io/.
 
 Contributions are always welcome!
 
-# Multi-platform you say?
-
-Well, yes, that is the intention. However unfortunately as of the time of this
-first alpha, Perspex is only shipping with a Windows backend. There *is* a
-Gtk/Cairo backend that's working pretty well (at least on Windows) but it's not
-included in this release due to packaging issues. In addition, the framework did
-work on Linux at one point but with the recent Mono 4.0 something has gone
-wrong, and we need time to work out what that is. Getting Perspex working again
-on non-windows support is the next thing we'll be concentrating on. You can
-track the progress on Linux in the [issue](https://github.com/grokys/Perspex/issues/78).
-
 ## Building and Using
 
-In order to build Perpex under Windows you need a compiler that supports C# 6 such
+See the [build instructions here](https://github.com/grokys/Perspex/blob/master/docs/build.md)
-as Visual Studio 2015. To compile the project under windows, you must have gtk-sharp 
-installed. However, if you're not interested in building the cross-platform bits you 
-can simply unload the Perspex.Cairo and Perspex.Gtk project in Visual Studio.
-
-To build with mono (even though everything's not fully working as yet) check out the
-[instructions here](docs/mono-build.md) and the [Linux issue](https://github.com/grokys/Perspex/issues/78).
 
 ## Contributing ##
 
-Please read the [contribution guidelines](Docs/contributing.md) before submitting a pull request.
+Please read the [contribution guidelines](docs/contributing.md) before submitting a pull request.