diff --git a/application/src/main/resources/thingsboard.yml b/application/src/main/resources/thingsboard.yml index 812b296790..6540888ba1 100644 --- a/application/src/main/resources/thingsboard.yml +++ b/application/src/main/resources/thingsboard.yml @@ -120,20 +120,20 @@ app: # Application version version: "@project.version@" -# Zookeeper connection parameters +# ZooKeeper connection parameters # Controls ZooKeeper-based service discovery and cluster coordination for microservice deployments. zk: - # Enable/disable zookeeper discovery service. + # Enable/disable ZooKeeper discovery service. enabled: "${ZOOKEEPER_ENABLED:false}" - # Zookeeper connect string + # ZooKeeper connect string url: "${ZOOKEEPER_URL:localhost:2181}" - # Zookeeper retry interval in milliseconds + # ZooKeeper retry interval in milliseconds retry_interval_ms: "${ZOOKEEPER_RETRY_INTERVAL_MS:3000}" - # Zookeeper connection timeout in milliseconds + # ZooKeeper connection timeout in milliseconds connection_timeout_ms: "${ZOOKEEPER_CONNECTION_TIMEOUT_MS:3000}" - # Zookeeper session timeout in milliseconds + # ZooKeeper session timeout in milliseconds session_timeout_ms: "${ZOOKEEPER_SESSION_TIMEOUT_MS:3000}" - # Name of the directory in zookeeper 'filesystem' + # Name of the directory in ZooKeeper 'filesystem' zk_dir: "${ZOOKEEPER_NODES_DIR:/thingsboard}" # The recalculate_delay property is recommended in a microservices architecture setup for rule-engine services. # This property provides a pause to ensure that when a rule-engine service is restarted, other nodes don't immediately attempt to recalculate their partitions. @@ -141,7 +141,7 @@ zk: recalculate_delay: "${ZOOKEEPER_RECALCULATE_DELAY_MS:0}" # Cluster parameters -# Controls inter-node communication statistics within a ThingsBoard cluster. +# Controls cluster statistics — tracks the number of messages exchanged between cluster nodes. cluster: stats: # Enable/Disable the cluster statistics. Calculates the number of messages sent between cluster nodes based on each type @@ -610,14 +610,14 @@ actors: response_timeout_ms: "${ACTORS_RPC_RESPONSE_TIMEOUT_MS:30000}" # Close transport session if RPC delivery timed out. If enabled, RPC will be reverted to the queued state. # Note: - # - For MQTT transport: - # - QoS level 0: This feature does not apply, as no acknowledgment is expected, and therefore no timeout is triggered. - # - QoS level 1: This feature applies, as an acknowledgment is expected. - # - QoS level 2: Unsupported. - # - For CoAP transport: - # - Confirmable requests: This feature applies, as delivery confirmation is expected. - # - Non-confirmable requests: This feature does not apply, as no delivery acknowledgment is expected. - # - For HTTP and SNPM transports: RPC is considered delivered immediately, and there is no logic to await acknowledgment. + # close_session_on_rpc_delivery_timeout: "${ACTORS_RPC_CLOSE_SESSION_ON_RPC_DELIVERY_TIMEOUT:false}" statistics: # Enable/disable actor statistics @@ -825,17 +825,17 @@ redis: # if set false will be used pool config build from values of the pool config section useDefaultPoolConfig: "${REDIS_USE_DEFAULT_POOL_CONFIG:true}" sentinel: - # name of the master node + # Name of the master node master: "${REDIS_MASTER:}" - # comma-separated list of "host:port" pairs of sentinels + # Comma-separated list of "host:port" pairs of sentinels sentinels: "${REDIS_SENTINELS:}" - # password to authenticate with sentinel + # Password to authenticate with sentinel password: "${REDIS_SENTINEL_PASSWORD:}" - # if set false will be used pool config build from values of the pool config section + # If set false will be used pool config build from values of the pool config section useDefaultPoolConfig: "${REDIS_USE_DEFAULT_POOL_CONFIG:true}" - # db index + # Redis logical database index to select after connecting. db: "${REDIS_DB:0}" - # db password + # Password for Redis authentication (leave empty if not required). password: "${REDIS_PASSWORD:}" # Redis username for ACL authentication (Redis 6.0+). Leave empty for legacy password-only auth username: "${REDIS_USERNAME:}" @@ -1148,10 +1148,10 @@ transport: activity: # This property specifies the strategy for reporting activity events within each reporting period. # The accepted values are 'FIRST', 'LAST', 'FIRST_AND_LAST' and 'ALL'. - # - 'FIRST': Only the first activity event in each reporting period is reported. - # - 'LAST': Only the last activity event in the reporting period is reported. - # - 'FIRST_AND_LAST': Both the first and last activity events in the reporting period are reported. - # - 'ALL': All activity events in the reporting period are reported. + # reporting_strategy: "${TB_TRANSPORT_ACTIVITY_REPORTING_STRATEGY:LAST}" json: # Cast String data types to Numeric if possible when processing Telemetry/Attributes JSON @@ -1269,16 +1269,16 @@ transport: dtls: # RFC7925_RETRANSMISSION_TIMEOUT_IN_MILLISECONDS = 9000 retransmission_timeout: "${LWM2M_DTLS_RETRANSMISSION_TIMEOUT_MS:9000}" - # CoAP DTLS connection ID length for LWM2M. RFC 9146, Connection Identifier for DTLS 1.2 - # Default: off + # LWM2M DTLS connection ID length for LWM2M. RFC 9146, Connection Identifier for DTLS 1.2 + # Default: off.
# Control usage of DTLS connection ID length (CID). - # - 'off' to deactivate it. - # - 'on' to activate Connection ID support (same as CID 0 or more 0). - # - A positive value defines generated CID size in bytes. - # - A value of 0 means we accept using CID but will not generate one for foreign peer (enables support but not for incoming traffic). - # - A value between 0 and <= 4: SingleNodeConnectionIdGenerator is used - # - A value that are > 4: MultiNodeConnectionIdGenerator is used - connection_id_length: "${LWM2M_DTLS_CONNECTION_ID_LENGTH:}" + # + connection_id_length: "${LWM2M_DTLS_CONNECTION_ID_LENGTH:8}" server: # LwM2M Server ID id: "${LWM2M_SERVER_ID:123}" @@ -1470,15 +1470,15 @@ coap: # CoAP DTLS bind port bind_port: "${COAP_DTLS_BIND_PORT:5684}" # CoAP DTLS connection ID length. RFC 9146, Connection Identifier for DTLS 1.2 - # Default: off + # Default: off.
# Control usage of DTLS connection ID length (CID). - # - 'off' to deactivate it. - # - 'on' to activate Connection ID support (same as CID 0 or more 0). - # - A positive value defines generated CID size in bytes. - # - A value of 0 means we accept using CID but will not generate one for foreign peer (enables support but not for incoming traffic). - # - A value between 0 and <= 4: SingleNodeConnectionIdGenerator is used - # - A value that are > 4: MultiNodeConnectionIdGenerator is used - connection_id_length: "${COAP_DTLS_CONNECTION_ID_LENGTH:}" + # + connection_id_length: "${COAP_DTLS_CONNECTION_ID_LENGTH:8}" # Specify the MTU (Maximum Transmission Unit). # Should be used if LAN MTU is not used, e.g. if IP tunnels are used or if the client uses a smaller value than the LAN MTU. # Default = 1024 @@ -1494,13 +1494,13 @@ coap: # In order to negotiate smaller maximum fragment lengths, # clients MAY include an extension of type "max_fragment_length" in the (extended) client hello. # The "extension_data" field of this extension SHALL contain: - # enum { + # 
 enum {
     #   2^9(1) == 512,
     #   2^10(2) == 1024,
     #   2^11(3) == 2048,
     #   2^12(4) == 4096,
     #   (255)
-    # } MaxFragmentLength;
+    # } MaxFragmentLength;
# TLS already requires clients and servers to support fragmentation of handshake messages. max_fragment_length: "${COAP_DTLS_MAX_FRAGMENT_LENGTH:1024}" # Server DTLS credentials @@ -2180,7 +2180,7 @@ mobileApp: # Link to App Store for Thingsboard Live mobile application appStoreLink: "${TB_MOBILE_APP_APP_STORE_LINK:https://apps.apple.com/us/app/thingsboard-live/id1594355695}" -# MQTT client settings +# MQTT client parameters # Configures MQTT client retransmission behavior including max attempts, initial delay, and jitter factor. mqtt: # MQTT client configuration parameters diff --git a/edqs/src/main/resources/edqs.yml b/edqs/src/main/resources/edqs.yml index 4dc404e2ca..cad0fcaccc 100644 --- a/edqs/src/main/resources/edqs.yml +++ b/edqs/src/main/resources/edqs.yml @@ -25,19 +25,19 @@ app: # Application version version: "@project.version@" -# Zookeeper connection parameters +# ZooKeeper connection parameters zk: - # Enable/disable zookeeper discovery service. + # Enable/disable ZooKeeper discovery service. enabled: "${ZOOKEEPER_ENABLED:true}" - # Zookeeper connect string + # ZooKeeper connect string url: "${ZOOKEEPER_URL:localhost:2181}" - # Zookeeper retry interval in milliseconds + # ZooKeeper retry interval in milliseconds retry_interval_ms: "${ZOOKEEPER_RETRY_INTERVAL_MS:3000}" - # Zookeeper connection timeout in milliseconds + # ZooKeeper connection timeout in milliseconds connection_timeout_ms: "${ZOOKEEPER_CONNECTION_TIMEOUT_MS:3000}" - # Zookeeper session timeout in milliseconds + # ZooKeeper session timeout in milliseconds session_timeout_ms: "${ZOOKEEPER_SESSION_TIMEOUT_MS:3000}" - # Name of the directory in zookeeper 'filesystem' + # Name of the directory in ZooKeeper 'filesystem' zk_dir: "${ZOOKEEPER_NODES_DIR:/thingsboard}" # The recalculate_delay property is recommended in a microservices architecture setup for rule-engine services. # This property provides a pause to ensure that when a rule-engine service is restarted, other nodes don't immediately attempt to recalculate their partitions. diff --git a/msa/js-executor/config/default.yml b/msa/js-executor/config/default.yml index bde09551ac..feae8edc4a 100644 --- a/msa/js-executor/config/default.yml +++ b/msa/js-executor/config/default.yml @@ -35,7 +35,7 @@ kafka: servers: "localhost:9092" replication_factor: "1" # Number of replicas for each Kafka topic partition acks: "1" # -1 = all; 0 = no acknowledgments; 1 = only waits for the leader to acknowledge - batch_size: "128" # Maximum number of bytes the producer batches per partition before sending + batch_size: "128" # Maximum number of messages to accumulate before triggering a batch send linger_ms: "5" # Time in milliseconds the producer waits before sending a batch, allowing more messages to accumulate partitions_consumed_concurrently: "1" # (EXPERIMENTAL) increase this value if you are planning to handle more than one partition (scale up, scale down) - this will decrease the latency requestTimeout: "30000" # Time in milliseconds to wait for a response to a Kafka request before timing out @@ -66,7 +66,7 @@ script: # (file system, environment variables, child_process, etc.) to script # authors. Use "false" only as a performance trade-off in trusted, # non-public clusters where every script author is fully trusted. - use_sandbox: "true" # Run scripts inside an isolated sandbox to prevent access to Node.js internals + use_sandbox: "true" memory_usage_trace_frequency: "1000" # Log memory usage every N script executions script_body_trace_frequency: "10000" # Log the script body every N script executions stat_print_frequency: "10000" # Print execution statistics every N script executions diff --git a/msa/vc-executor/src/main/resources/tb-vc-executor.yml b/msa/vc-executor/src/main/resources/tb-vc-executor.yml index 0fe37abf22..e540182c06 100644 --- a/msa/vc-executor/src/main/resources/tb-vc-executor.yml +++ b/msa/vc-executor/src/main/resources/tb-vc-executor.yml @@ -28,19 +28,20 @@ server: # Server bind port (has no effect if web-environment is disabled). port: "${HTTP_BIND_PORT:8086}" -# Zookeeper connection parameters. Used for service discovery. +# ZooKeeper connection parameters +# Controls ZooKeeper-based service discovery and cluster coordination for microservice deployments. zk: - # Enable/disable zookeeper discovery service. + # Enable/disable ZooKeeper discovery service. enabled: "${ZOOKEEPER_ENABLED:true}" - # Zookeeper connect string + # ZooKeeper connect string url: "${ZOOKEEPER_URL:localhost:2181}" - # Zookeeper retry interval in milliseconds + # ZooKeeper retry interval in milliseconds retry_interval_ms: "${ZOOKEEPER_RETRY_INTERVAL_MS:3000}" - # Zookeeper connection timeout in milliseconds + # ZooKeeper connection timeout in milliseconds connection_timeout_ms: "${ZOOKEEPER_CONNECTION_TIMEOUT_MS:3000}" - # Zookeeper session timeout in milliseconds + # ZooKeeper session timeout in milliseconds session_timeout_ms: "${ZOOKEEPER_SESSION_TIMEOUT_MS:3000}" - # Name of the directory in zookeeper 'filesystem' + # Name of the directory in ZooKeeper 'filesystem' zk_dir: "${ZOOKEEPER_NODES_DIR:/thingsboard}" # The recalculate_delay property is recommended in a microservices architecture setup for rule-engine services. # This property provides a pause to ensure that when a rule-engine service is restarted, other nodes don't immediately attempt to recalculate their partitions. diff --git a/transport/coap/src/main/resources/tb-coap-transport.yml b/transport/coap/src/main/resources/tb-coap-transport.yml index f84dc04907..dd5b77ab00 100644 --- a/transport/coap/src/main/resources/tb-coap-transport.yml +++ b/transport/coap/src/main/resources/tb-coap-transport.yml @@ -28,20 +28,20 @@ server: # Server bind port (has no effect if web-environment is disabled). port: "${HTTP_BIND_PORT:8083}" -# Zookeeper connection parameters. Used for service discovery. +# ZooKeeper connection parameters. Used for service discovery. # Defines how this service registers itself and discovers other nodes via Apache ZooKeeper. zk: - # Enable/disable zookeeper discovery service. + # Enable/disable ZooKeeper discovery service. enabled: "${ZOOKEEPER_ENABLED:false}" - # Zookeeper connect string + # ZooKeeper connect string url: "${ZOOKEEPER_URL:localhost:2181}" - # Zookeeper retry interval in milliseconds + # ZooKeeper retry interval in milliseconds retry_interval_ms: "${ZOOKEEPER_RETRY_INTERVAL_MS:3000}" - # Zookeeper connection timeout in milliseconds + # ZooKeeper connection timeout in milliseconds connection_timeout_ms: "${ZOOKEEPER_CONNECTION_TIMEOUT_MS:3000}" - # Zookeeper session timeout in milliseconds + # ZooKeeper session timeout in milliseconds session_timeout_ms: "${ZOOKEEPER_SESSION_TIMEOUT_MS:3000}" - # Name of the directory in zookeeper 'filesystem' + # Name of the directory in ZooKeeper 'filesystem' zk_dir: "${ZOOKEEPER_NODES_DIR:/thingsboard}" # The recalculate_delay property is recommended in a microservices architecture setup for rule-engine services. # This property provides a pause to ensure that when a rule-engine service is restarted, other nodes don't immediately attempt to recalculate their partitions. @@ -202,15 +202,15 @@ coap: # CoAP DTLS bind port bind_port: "${COAP_DTLS_BIND_PORT:5684}" # CoAP DTLS connection ID length. RFC 9146, Connection Identifier for DTLS 1.2 - # Default: off + # Default: off.
# Control usage of DTLS connection ID length (CID). - # - 'off' to deactivate it. - # - 'on' to activate Connection ID support (same as CID 0 or more 0). - # - A positive value defines generated CID size in bytes. - # - A value of 0 means we accept using CID but will not generate one for foreign peer (enables support but not for incoming traffic). - # - A value between 0 and <= 4: SingleNodeConnectionIdGenerator is used - # - A value that are > 4: MultiNodeConnectionIdGenerator is used - connection_id_length: "${COAP_DTLS_CONNECTION_ID_LENGTH:}" + # + connection_id_length: "${COAP_DTLS_CONNECTION_ID_LENGTH:8}" # Specify the MTU (Maximum Transmission Unit). # Should be used if LAN MTU is not used, e.g. if IP tunnels are used or if the client uses a smaller value than the LAN MTU. # Default = 1024 diff --git a/transport/http/src/main/resources/tb-http-transport.yml b/transport/http/src/main/resources/tb-http-transport.yml index 44adcf6e14..9fe5b50db8 100644 --- a/transport/http/src/main/resources/tb-http-transport.yml +++ b/transport/http/src/main/resources/tb-http-transport.yml @@ -60,19 +60,20 @@ spring.main.allow-circular-references: "true" # Spring Boot configuration proper spring.servlet.multipart.max-file-size: "${SPRING_SERVLET_MULTIPART_MAX_FILE_SIZE:50MB}" # Total file size cannot exceed 50MB when configuring file uploads spring.servlet.multipart.max-request-size: "${SPRING_SERVLET_MULTIPART_MAX_REQUEST_SIZE:50MB}" # Total request size for a multipart/form-data cannot exceed 50MB -# Zookeeper connection parameters. Used for service discovery. +# ZooKeeper connection parameters +# Controls ZooKeeper-based service discovery and cluster coordination for microservice deployments. zk: - # Enable/disable zookeeper discovery service. + # Enable/disable ZooKeeper discovery service. enabled: "${ZOOKEEPER_ENABLED:false}" - # Zookeeper connect string + # ZooKeeper connect string url: "${ZOOKEEPER_URL:localhost:2181}" - # Zookeeper retry interval in milliseconds + # ZooKeeper retry interval in milliseconds retry_interval_ms: "${ZOOKEEPER_RETRY_INTERVAL_MS:3000}" - # Zookeeper connection timeout in milliseconds + # ZooKeeper connection timeout in milliseconds connection_timeout_ms: "${ZOOKEEPER_CONNECTION_TIMEOUT_MS:3000}" - # Zookeeper session timeout in milliseconds + # ZooKeeper session timeout in milliseconds session_timeout_ms: "${ZOOKEEPER_SESSION_TIMEOUT_MS:3000}" - # Name of the directory in zookeeper 'filesystem' + # Name of the directory in ZooKeeper 'filesystem' zk_dir: "${ZOOKEEPER_NODES_DIR:/thingsboard}" # The recalculate_delay property is recommended in a microservices architecture setup for rule-engine services. # This property provides a pause to ensure that when a rule-engine service is restarted, other nodes don't immediately attempt to recalculate their partitions. @@ -127,9 +128,9 @@ redis: password: "${REDIS_SENTINEL_PASSWORD:}" # if set false will be used pool config build from values of the pool config section useDefaultPoolConfig: "${REDIS_USE_DEFAULT_POOL_CONFIG:true}" - # db index + # Redis logical database index to select after connecting. db: "${REDIS_DB:0}" - # db password + # Password for Redis authentication (leave empty if not required). password: "${REDIS_PASSWORD:}" # Redis username for ACL authentication (Redis 6.0+). Leave empty for legacy password-only auth username: "${REDIS_USERNAME:}" diff --git a/transport/lwm2m/src/main/resources/tb-lwm2m-transport.yml b/transport/lwm2m/src/main/resources/tb-lwm2m-transport.yml index cb554fb705..161e1a39fb 100644 --- a/transport/lwm2m/src/main/resources/tb-lwm2m-transport.yml +++ b/transport/lwm2m/src/main/resources/tb-lwm2m-transport.yml @@ -28,19 +28,20 @@ server: # Server bind port (has no effect if web-environment is disabled). port: "${HTTP_BIND_PORT:8083}" -# Zookeeper connection parameters. Used for service discovery. +# ZooKeeper connection parameters +# Controls ZooKeeper-based service discovery and cluster coordination for microservice deployments. zk: - # Enable/disable zookeeper discovery service. + # Enable/disable ZooKeeper discovery service. enabled: "${ZOOKEEPER_ENABLED:false}" - # Zookeeper connect string + # ZooKeeper connect string url: "${ZOOKEEPER_URL:localhost:2181}" - # Zookeeper retry interval in milliseconds + # ZooKeeper retry interval in milliseconds retry_interval_ms: "${ZOOKEEPER_RETRY_INTERVAL_MS:3000}" - # Zookeeper connection timeout in milliseconds + # ZooKeeper connection timeout in milliseconds connection_timeout_ms: "${ZOOKEEPER_CONNECTION_TIMEOUT_MS:3000}" - # Zookeeper session timeout in milliseconds + # ZooKeeper session timeout in milliseconds session_timeout_ms: "${ZOOKEEPER_SESSION_TIMEOUT_MS:3000}" - # Name of the directory in zookeeper 'filesystem' + # Name of the directory in ZooKeeper 'filesystem' zk_dir: "${ZOOKEEPER_NODES_DIR:/thingsboard}" # The recalculate_delay property is recommended in a microservices architecture setup for rule-engine services. # This property provides a pause to ensure that when a rule-engine service is restarted, other nodes don't immediately attempt to recalculate their partitions. @@ -94,9 +95,9 @@ redis: password: "${REDIS_SENTINEL_PASSWORD:}" # if set false will be used pool config build from values of the pool config section useDefaultPoolConfig: "${REDIS_USE_DEFAULT_POOL_CONFIG:true}" - # db index + # Redis logical database index to select after connecting. db: "${REDIS_DB:0}" - # db password + # Password for Redis authentication (leave empty if not required). password: "${REDIS_PASSWORD:}" # Redis username for ACL authentication (Redis 6.0+). Leave empty for legacy password-only auth username: "${REDIS_USERNAME:}" @@ -171,16 +172,16 @@ transport: dtls: # RFC7925_RETRANSMISSION_TIMEOUT_IN_MILLISECONDS = 9000 retransmission_timeout: "${LWM2M_DTLS_RETRANSMISSION_TIMEOUT_MS:9000}" - # CoAP DTLS connection ID length for LWM2M. RFC 9146, Connection Identifier for DTLS 1.2 - # Default: off + # LWM2M DTLS connection ID length for LWM2M. RFC 9146, Connection Identifier for DTLS 1.2 + # Default: off.
# Control usage of DTLS connection ID length (CID). - # - 'off' to deactivate it. - # - 'on' to activate Connection ID support (same as CID 0 or more 0). - # - A positive value defines generated CID size in bytes. - # - A value of 0 means we accept using CID but will not generate one for foreign peer (enables support but not for incoming traffic). - # - A value between 0 and <= 4: SingleNodeConnectionIdGenerator is used - # - A value that are > 4: MultiNodeConnectionIdGenerator is used - connection_id_length: "${LWM2M_DTLS_CONNECTION_ID_LENGTH:}" + # + connection_id_length: "${LWM2M_DTLS_CONNECTION_ID_LENGTH:8}" server: # LwM2M Server ID id: "${LWM2M_SERVER_ID:123}" diff --git a/transport/mqtt/src/main/resources/tb-mqtt-transport.yml b/transport/mqtt/src/main/resources/tb-mqtt-transport.yml index fcdc9000bd..35bb11d039 100644 --- a/transport/mqtt/src/main/resources/tb-mqtt-transport.yml +++ b/transport/mqtt/src/main/resources/tb-mqtt-transport.yml @@ -28,20 +28,20 @@ server: # Server bind port (has no effect if web-environment is disabled). port: "${HTTP_BIND_PORT:8083}" -# Zookeeper connection parameters. Used for service discovery. -# Defines connection, session, retry settings and the node directory path for Zookeeper-based cluster coordination. +# ZooKeeper connection parameters. Used for service discovery. +# Defines connection, session, retry settings and the node directory path for ZooKeeper-based cluster coordination. zk: - # Enable/disable zookeeper discovery service. + # Enable/disable ZooKeeper discovery service. enabled: "${ZOOKEEPER_ENABLED:false}" - # Zookeeper connect string + # ZooKeeper connect string url: "${ZOOKEEPER_URL:localhost:2181}" - # Zookeeper retry interval in milliseconds + # ZooKeeper retry interval in milliseconds retry_interval_ms: "${ZOOKEEPER_RETRY_INTERVAL_MS:3000}" - # Zookeeper connection timeout in milliseconds + # ZooKeeper connection timeout in milliseconds connection_timeout_ms: "${ZOOKEEPER_CONNECTION_TIMEOUT_MS:3000}" - # Zookeeper session timeout in milliseconds + # ZooKeeper session timeout in milliseconds session_timeout_ms: "${ZOOKEEPER_SESSION_TIMEOUT_MS:3000}" - # Name of the directory in zookeeper 'filesystem' + # Name of the directory in ZooKeeper 'filesystem' zk_dir: "${ZOOKEEPER_NODES_DIR:/thingsboard}" # The recalculate_delay property is recommended in a microservices architecture setup for rule-engine services. # This property provides a pause to ensure that when a rule-engine service is restarted, other nodes don't immediately attempt to recalculate their partitions. @@ -96,9 +96,9 @@ redis: password: "${REDIS_SENTINEL_PASSWORD:}" # if set false will be used pool config build from values of the pool config section useDefaultPoolConfig: "${REDIS_USE_DEFAULT_POOL_CONFIG:true}" - # db index + # Redis logical database index to select after connecting. db: "${REDIS_DB:0}" - # db password + # Password for Redis authentication (leave empty if not required). password: "${REDIS_PASSWORD:}" # Redis username for ACL authentication (Redis 6.0+). Leave empty for legacy password-only auth username: "${REDIS_USERNAME:}" diff --git a/transport/snmp/src/main/resources/tb-snmp-transport.yml b/transport/snmp/src/main/resources/tb-snmp-transport.yml index 4df225778e..3816068d35 100644 --- a/transport/snmp/src/main/resources/tb-snmp-transport.yml +++ b/transport/snmp/src/main/resources/tb-snmp-transport.yml @@ -28,20 +28,20 @@ server: # Server bind port (has no effect if web-environment is disabled). port: "${HTTP_BIND_PORT:8083}" -# Zookeeper connection parameters. Used for service discovery. +# ZooKeeper connection parameters. Used for service discovery. # Defines ZooKeeper connectivity, timeouts, and cluster node registration settings for service coordination. zk: - # Enable/disable zookeeper discovery service. + # Enable/disable ZooKeeper discovery service. enabled: "${ZOOKEEPER_ENABLED:false}" - # Zookeeper connect string + # ZooKeeper connect string url: "${ZOOKEEPER_URL:localhost:2181}" - # Zookeeper retry interval in milliseconds + # ZooKeeper retry interval in milliseconds retry_interval_ms: "${ZOOKEEPER_RETRY_INTERVAL_MS:3000}" - # Zookeeper connection timeout in milliseconds + # ZooKeeper connection timeout in milliseconds connection_timeout_ms: "${ZOOKEEPER_CONNECTION_TIMEOUT_MS:3000}" - # Zookeeper session timeout in milliseconds + # ZooKeeper session timeout in milliseconds session_timeout_ms: "${ZOOKEEPER_SESSION_TIMEOUT_MS:3000}" - # Name of the directory in zookeeper 'filesystem' + # Name of the directory in ZooKeeper 'filesystem' zk_dir: "${ZOOKEEPER_NODES_DIR:/thingsboard}" # The recalculate_delay property is recommended in a microservices architecture setup for rule-engine services. # This property provides a pause to ensure that when a rule-engine service is restarted, other nodes don't immediately attempt to recalculate their partitions. @@ -95,9 +95,9 @@ redis: password: "${REDIS_SENTINEL_PASSWORD:}" # if set false will be used pool config build from values of the pool config section useDefaultPoolConfig: "${REDIS_USE_DEFAULT_POOL_CONFIG:true}" - # db index + # Redis logical database index to select after connecting. db: "${REDIS_DB:0}" - # db password + # Password for Redis authentication (leave empty if not required). password: "${REDIS_PASSWORD:}" # Redis username for ACL authentication (Redis 6.0+). Leave empty for legacy password-only auth username: "${REDIS_USERNAME:}"